Atomic Absorption

Hallow Cathed Lamps

Our lamps are specially designed to emit high intensity at the recommended operating current, resulting in low Signal-to-Noise ratio and excellent

performance. We recommend operating current 1/3 maximum current to obtain long lamp life. Our lamps can be used on many brands of AAS, including,

Varian, Shimadzu, GBC, Analytik Jena, Hewleet Packard, Buck Scientific, Agilent, Beckman, Hitachi, Thermo, PGeneral , Chemito etc. We have many years experience in this field. We can supply excellent quality at competitive price.

Gas Mini station

Gas Mini Station module is consisting of Toggle valve on/off type, mini regulator, pressure gauge for individual gases.
Inlet & out let connection : ¼”
MOC: MS. Powder quoted. Wall mounted.
Pressure : Inlet 0-15 kg/cm2,
Outlet : 0-10kg/cm2 OR 0-2.5 kg/cm2*.
Gauge: 2” Round, Regulator : Mini Regulator, MOC : S.S

Fume Hood

MOC : S.S. Fan/Blower :Electrically operated Vertical & Horizontal adjustable. Wall mounted with anchor fasteners.
Size : Wall to front : 28′ (Approx)
Top to bottom : 51′
Burner top : 13.7′ X 9′ ( Approx)

Air Compressor

Oil free compressor with 20 L tank, MODEL : HS-WP-1 T, 3/4 HP
Pressure: From 30 PSIG to 100 PSIG, Free Air Displacement – From 20LPM to 100LPM Electric Motors Equipped with Permanent magnet of Superior ‘F’ Class Insulation winding for long & durable.
Supply : 230V/50 Hz/ single phase, Physical weight: 40 KG, H x W x L: 18″x 18″x 27″
Includes : Pressure Switch, High Pressure House, Pressure, Gauge, Relief Valve, and Drain Valve & Outlet Valve & MCB. Practically maintenance free.
Make : “Hi Speed”.

Cylinder Regulators

MOC : Brass / S.S,
Knob : Black, Spindle nut : Brass, Spring
locators : Brass
Spring : Carbon steel,
Diapharm Assemblies : S.S,
Pin Valve Assy : – Teflon/ S.S.
Dummy plug nut : S.S, Safety
Valve : S.S,
Inlet connection : Standard
Outlet connection : – 1/8″ OR ¼” ferrules fittings,
Pressure gauge inlet (wikka imported):- 0- 280 kg/cm2 OR 42 kg/cm2*
Pressure gauge outlet (wikka imported):- 0-10.6 kg/cm2
OR 2.5 kg/cm2*
*(optional as per Gas application)

Cylinder Manfold System

MOC: – S.S with ON/OFF valve (key operated), wall mounting bracket’s. Std. female threading for Cylinder regulator & Inlet gas.
Pigtail: – S.S double braided, 1 mtr long with 2 no male nut.

Cylinder Holding brakets

MOC : MS powder quoted with locking chain, wall mounted with 4 no rivets

Cylinder Trolley

MOC: – MS powder quoted, two wheels, for single cylinder as per photograph.

Cylinder Key

MOC: – MS plated both side operative.

Tubing

MOC: – Polypropylene.
Size : 1/4″ (6.32 mm),
Pressure : up to 25kg/cm2,
Colour : Red/ Blue/ Black
Specially used in Chemical Company.

Fittings

All fittings are available as per international std.

Calibration Standard Solution

Make : Chromgate
Stock Solution – 1000 ppm optional calibration Std. set

Servo Voltage Stabilizer

Make : 5R Electronics
Input voltage : 230 V AC +/- 10% (single phase)
Output voltage : 230V (auto correction), True sine wave.
Indication : Low/ High voltage (LED indication)
Voltage read out : selectable for input & out put voltage. (Voltmeter)
Protection : under / high voltage, MCB for high current.
Cabinet : MS powder quoted with rubber grommets.
Capacity : 5 KVA/ 3 KVA*

Moisture Separator for Air

Make : Jenetics
Mini regulator : Inlet 0-15 kg/cm2, Outlet: – 0-10 kg/cm2
Gauge : 0-10 kg/cm2. Moisture drain valve, oil separator filter, Wall mounted with clamp, ¼ “inlet & outlet connection, inbuilt micron filter for dust.