Spectrophotometer

Hallow Cathed Lamps

Our lamps are specially designed to emit high intensity at the recommended operating current, resulting in low Signal-to-Noise ratio and excellent performance. We recommend operating current 1/3 maximum current to obtain long lamp life. Our lamps can be used on many brands of AAS, including, Varian, Shimadzu, GBC, Analytik Jena, Hewleet Packard, Buck Scientific, Agilent, Beckman, Hitachi, Thermo, PGeneral , Chemito etc. We have many years experience in this field. We can supply excellent quality at competitive price.

Gas Purification & Control Panel for AAS.

MOC :- M.S. with exterior epoxy based Powder Coating. Individual Gas line & easily detachable. Frame mounted
Operating Pressure : Inlet Gas Pressure :- 0 15 kg / cm2.
Outlet Gas Pressure: – 0 10 kg / cm2.
Dimension :- 25.1x 15.3x 4.4 inch (L x W x H) Aprox.
Weight :- 11.3 KG Aprox.
Intel & Out let Connection :- 1/8″ Size , ( 1/ 4″ optional )
Mounting :- Wall mounted with frame.

Mini station

Gas Mini Station module is consisting of Toggle valve on/off type, mini regulator, pressure gauge for individual gases.
Inlet & out let connection :- ¼”
MOC: MS. Powder quoted. Wall mounted.
Pressure :- Inlet 0-15 kg/cm2,
Outlet :- 0-10kg/cm2 OR 0-2.5 kg/cm2*.
Gauge :- 2″ Round,
Regulator :- Mini Regulator, MOC : S.S

Air compressor

Oil free compressor with 20 L tank, MODEL : HS-WP-1 T, 3/4 HP
Pressure :- From 30 PSIG to 100 PSIG, Free Air Displacement – From
20LPM to 100LPM Electric Motors Equipped with Permanent magnet of Superior ‘F’
Class Insulation winding for long & durable
Supply :- 230V/50 Hz/ single phase, Physical weight: 40 KG,
H x W x L: 18″x 18″x 27″
Includes :- Pressure Switch, High Pressure House, Pressure, Gauge,
Relief Valve, and Drain Valve & Outlet Valve & MCB. Practically
maintenance free.
Make :- “Hi Speed”.

Cylinder regulators

MOC :- Brass / S.S,
Knob :- Black, Spindle nut : Brass, Spring locators : Brass
Spring :- Carbon steel,
Diapharm Assemblies :– S.S,
Pin Valve Assy :- Teflon/ S.S.
Dummy plug nut :– S.S, Safety
Valve :- S.S,
Inlet connection :- Standard
Outlet connection : – 1/8″ OR ¼” ferrules fittings,
Pressure gauge inlet (wikka imported):- 0- 280 kg/cm2 OR 42 kg/cm2*
Pressure gauge outlet (wikka imported):- 0-10.6 kg/cm2
OR 2.5 kg/cm2*
* (optional as per Gas application)

Cylinder manifold with pigtail.

MOC :- S.S with ON/OFF valve (key operated), wall mounting bracket’s. Std. female threading for Cylinder regulator & Inlet gas.
Pigtail :- S.S double braided, 1 mtr long with 2 no male nut.

Cylinder holding brackets

MOC :- MS powder quoted with locking chain, wall mounted with 4 no rivet

Cylinder trolley

MOC :- MS powder quoted, two wheels, for single cylinder as per photograph.

Tube ¼” flexible.

MOC :- Polypropylene, Size : 1/4″ (6.32 mm),
Pressure :- up to 25kg/cm2,
Colour :- Red/ Blue/ Black
Specially used in Chemical Company.

Brass /S.S fittings.

All fittings are available as per international std.

Calibration standard solutions.

Make :- Chromgate
Stock Solution :- 1000 ppm optional calibration Std. set

Moisture separator for Air

Make :- Jenetics
Mini regulator :- Inlet 0-15 kg/cm2, Outlet: – 0-10 kg/cm2
Gauge :- 0-10 kg/cm2. Moisture drain valve, oil separator filter,Wall mounted with clamp, ¼ “inlet & outlet connection, inbuilt micron filter for dust.